Why do I always tell myself not to start new projects, when such good intentions are clearly in vain? Here’s another one fresh off the painting table: Celts! I was foolish enough to pick up the wonderful Vercingetorix model from Warlord Games at Warcon ’18 and think I could leave it at that – well fat chance, Victrix is releasing some terrific plastic Gauls these days and I had to bite. My friends brought a set of their new Gallic Warriors as well as one of Fanatics home from Salute ’18, and I’m happy to report they’re already done! Huzzah!
First up, we have the meat-and-bones of the force: a big warband of your ordinary Celts. These were pretty straightforward to assemble: a mix of the both the topless and the fully dressed bodies, and of both the helmeted and bare heads, with swords, spears and a few javelins thrown in for good measure. Painting-wise, I opted for a radically different technique: I undercoated the models AP skeleton bone, heavily drybrushed them white, then applied all colours with just washes. Usually several washes were needed across a given area to get the required result, otherwise things would look too pastel. For instance, the skin tone is two washes of reikland fleshshade and one of seraphim sepia. Obviously, the metallic were painted in the usual manner, and I took special care to make them look super shiny for contrast. Also, as Celts wouldn’t look the part without them, I added freehanded patterns to at least one item of cloth on pretty much every model, with regular paint of course.
Also built from the Gallic Warriors set are these skirmishers. I elected to use just the topless bodies and bare heads for these – to get the point across that they’re the poorer kind of warrior. For these I had to do some cutting on the left arm to equip them with spare javelins, which means they’re not equipped with shields – hence, they look a lot less spectacular than the others!
Penis! These are the fanatics, and they were stupidly easy to paint with the aforementioned technique. It’s a 24-strong block of troops but I think I’ll be getting some more to bulk out the unit, for games like WAB where they really shine when fielded as a big block. In the first rank you can see a druid model from Warlord Games, which was a leftover from my Dacian project. He’s a bit smaller (haha…) than the others, but otherwise fits in fairly well. Using watered down incubi darkness I added tattoos/warpaint to these models to spice up their appearance, which I think was much needed.
Finally, here are two other characters; the first is that wonderful Vercingetorix model from Warlord Games. I altered just one thing, which was to give him a spare plastic shield so that I could apply a LBMS transfer without too much of a hassle.
The second is a plastic command model from the Gallic Warriors set which I’ll be using as a Battle Standard Bearer in WAB, or a regular standard bearer for other games. This guy received an open left hand from a Victrix hoplite, so that I could portray him leaning on his sheathed sword. Not my most impressive conversion ever, but I think it’s an effective little distinguishing feature.
So, well, there you go! A whole set of Celts, ready to be fielded alongside or against my Carthaginians. As models always look better when put next to each other, I have a couple of group photos for you.
This first group shot is for those moments when I’ll be playing WAB. The two decently sized warbands will be intimidating to most opponents – the druid confers Hatred to the already Frenzied fanatics, and the Battle Standard Bearer and Warlord go into the big Warrior block to boost its staying power. The skirmishers will either be fielded as a single big unit or two smaller ones.
The second group shot shows the troops broken down into 12-strong units, for our games of Hail Caesar, To The Strongest, Sword & Spear and the like. It’s a pretty healthy division, with five standard units and two small units.
Project done – for now… I once purchased a box of Gallic cavalry from Warlord as well as a Gallic cavalry command blister to use with my Dacians but never got round to using them, and I think they’ll be used here. The new Gallic cavalry from Victrix are also leering at me, of course. As 24 or 25 is a bit small for a Naked Fanatic unit I’d like to bump the unit up to around 32, and I might purchase some metals from Warlord Games for variety as another pack of 24 plastics would be a little much. Finally, I’m of a mind to build a warband of nobles on foot, using the regular plastic Gallic Warriors but all helmeted, with swords, and with the capes attached (which I didn’t use much yet). Plenty of options!
Through some not-so-subtly-dropped hints I got a few superb presents for my birthday. One of these was a copy of the WAB supplement Hannibal and the Punic Wars which she managed to find cheaply on Ebay, and, well, what’s the first word that comes to mind when you think of Hannibal?
These are the new plastic elephants from Victrix ltd. A great product – besides obviously being plastic and thus a treat to assemble, it comes with plenty of options for Ptolemaic, Roman, Numidian and, of course, Carthaginian versions. For me, that’s great – I used the linothorax-armoured riders with Carthaginian heads, but I can also use the Roman bodies in chainmail as veterans or Latin deserters, and the Numidians as allied infantry. Great!
I used the Little Big Men Studios decals as they are simply lovely – I can freehand, but not to anywhere near the level I’d need for this kind of patterning! A word on this to those readers who are interested in doing the same: It’s much, much easier to apply the decals before you affix the tower to the elephants. I had to cut down the decals on the ‘saddle cloth’ and had a lot of trouble getting the smaller ones to stick where they had to.
Other than that, painting was straighforward. The crew were painted identically to my other Carthaginians (more news on those soon, I hope), but the elephants were, naturally, rather a different matter. I drybrushed a dark grey and then a middle grey over a black undercoat. This looked crap, so I went in with the middle grey again but applied it as a layer highlighted, in angled streaks so as to get the right skin texture. The edge of the ears received a small layered highlight of medium skin tone applied directly over the grey, before everything was washed agrax earthshade.
Overall I had a great time painting them, even though it took nearly a month of on-and-off work! Right before they were done I already played a WAB battle with them, and they were quite effective. WAB is the reason why I decided to base them on 50x50mm bases; for those games which specify a unit breadth of 12cm I’ll prepare a bare 20x50mm base to put in between the two models.
There! Hope you like these as much as I do. I’ll have more Carthaginians ready in a bit, so there might be more Ancients on the blog very soon.
Ceterum censeo Duvel esse bibendam!
It’s the end of 2017, and another project has come to a close – huzzah! These hospitallers were actually among the first of my historical projects, being started up all the way back in – I think – 2012 with a box of plastic knights from Fireforge. I grew disenchanted with the models after having painted up just half the box’ contents, and the cavalry wing of the army has been neglected far too long, until this year. The rest of the cavalry will have to bide its time until it can appear on the blog, though, as the matter at hand is rather more interesting!
First up, we have the supreme commanders of the army – the grandmaster and a priestly fellow! Notice how I have tried to make them stand out a bit by using the idiosyncrasies of the figures – which are actually from Gripping Beast’s Teutonic range – such as the hair, the mitre, and so on. Colourwise I have added yellow to the palette, as white and yellow are papal colours. Stoving in Saracen skulls, approved by every pope since 1098!
Next up, these are two battle standard bearing types, predominantly to be used in WAB. As you can see I have used some leftover plastic bits from Fireforge kits to add some flair to these Gripping Beast models.
Finally, here are four other seneschal models. Most of these are from the Gripping Beast crusader command set, with one other stray Teuton (the one with the fur, of course!) added in. These have also all been modified to carry leftover weapons from Fireforge kits, as there is certainly a scale and style difference between the two manufacturers.
As well as painting dragging on for years on this project, rolling dice in anger with them is long overdue! So, to that end, my friend Flor is coming over with his Teutonic Order soon and we’ll duke it out using the WAB rules to see whether black with white accessories or white with black accessories is best. Groovy, baby!
With my Late Romans so close to completion I’ve given in to the allure of another ancients project… the flesh is weak! Spurred on by the release of Victrix’ Iberian infantry the Punic wars are a hot topic in our club, and I am the only one to have chosen the armies of Carthage.
I’ve picked up a box of Victrix Carthaginians, which will form the backbone of my collection, and I’ve added a number of extra command groups from Crusader Miniatures as well as cavalry from the latter. Of course I’ve also purchased the Hannibal foot and mounted model; the former will be converted into a Libyan captain of sorts. Let’s get on with this post and look at the first unit!
The middle base has a bog standard Crusader Miniatures command group, those on the left and right are Victrix plastics. As you can see the Vixtrix models are slightly taller and certainly more active looking, but otherwise they fit in fine.
I’ve painted these over a red undercoat – I was expecting to paint them with a lot more red, but eventually I used a lot more colours on these to keep them lively. As a definite first I’ve used plenty of pictorial reference material, mainly in the form of a couple of Ospreys I managed to pick up on the cheap!
Traditionally I’ve always gone for freehanded shield designs, but I think I’d go mad if I tried to replicate the shield designs you see above! So these are my first Little Big Men transfers, and I’m fairly happy with how they turned out. Things were a bit dicey when I applied black wash to the shield boss, as some of the wash decided to run underneath some imperceptible bubbles in the transfer, so I did have to go in with some paint to tidy up afterwards. Other than that, these transfers do make an average paintjob look smashing!
That’s it for now. Sorry for the long hiatus (more than a month, ouch), I don’t have as much free time as I used to and I prefer to spend it on painting instead of writing about painting. So I don’t know when the next update will follow, but rest assured – I haven’t forgotten this blog!
Who knows, I might even manage to finish a project this year! Incredible! These Late Romans have been on my plate for a little over a year now and I’m actually close to completing them. They’re a relatively small force, but I think they’re among the better-looking of my projects, what with those shields. It’s a double update today, with some artillery which I finished in late January on the one hand, and the companion cavalry on the other. Let’s take a look.
First off, these two scorpiones. I could have based these a little bit smaller, but as I’ll mostly be playing Sword & Spear with them they do have the mandatory 12cm frontage. I wish Gripping Beast did more than one set of poses for the crew, as it looks a bit strange this way, but otherwise they’re just fine.
Next up is this ballista. They came with a third crew member, but as the model in question is a fairly imperious looking chap I decided early last year to press him into service as one of my commanders. Still, even with just these two lads to man the thing I think it looks fine.
Finally we have these companions, which were an absolute breeze to paint up really. I started off from an AP fur brown undercoat spray which was mostly useful on the horses. The rest of the models were handled in the usual fashion, with the one exception being their golden shield rims and their purple helmet plumes, just to get the imperial theme across.
I originally didn’t plan on taking any cavalry beyond the mandatory clibinarii and some assorted horse archers, but when my gaming compatriot Eddy Maes decided to pass his bag of unused Late Roman lead around I couldn’t resist a good rummage! Once again Eddy, my sincere thanks for selling these on to me for a great price.
The one thing I’m lacking for the project in terms of models are dracones. I’ve prepared some long spears (stupidly long in this case) in the hands of the standard bearers to receive these later, but it’s holding back the completion of many a unit. Hopefully I’ll be able to track some down at Salute this year, which will be my first foray into that great convention!
Hope you liked this update, and until next time!
A quick update to show you some progress – I haven’t had much time to photograph models lately!
These Gripping Beast sculpts are always a joy to paint, with their deep detail and chunky faces. Their shields are also a big canvas on which paint some of those lovely shield designs which I shamelessly stole from Little Big Men – if you don’t feel like freehanding these, order from them as I hear they’re great.
On to some cavalry now! Either some companions or some horse archers, I’m not too sure yet. First off though, some more 6mm WSS. Stay tuned!
End of year means yours truly takes stock to consider the past year of brushwork and how to continue doing what one does best – painting some models! I’ll cover each of my projects one by one and ramble a bit. No pictures of models in this one, so if you’re the kind of fellow who looks at shinies without reading the context – check back later! Here goes.
- Napoleonic French: I’ve added a squadron of Chasseurs and one of Cuirassiers, two line battalions and a couple of vignette models over the course of the year. It’s my first historical project, and it’s still going strong. Next year I’d like to get at least two further line battalions ready for duty, paint up more cavalry as well as horse artillery. There’s also Napoleon’s Berlin Carriage…
- Vikings: My second project, and one that could almost be considered finished, were it not for the fact that I continue to collect and paint Northmen for the sheer joy of it. I’ve actually sold off a portion of my Viking army this year – mainly duplicates and plastics – and I might continue to do so, just to keep the collection fresh. In 2016 I have no immediate plans to purchase or paint new Vikings.
- Flemings/Crusaders: I’m fairly satisfied with my collection, so much of the past year was spent filling in some gaps; priests and pilgrims, a bishop, etc. What I did paint a lot of were Maltese crosses, with a decent number of sergeants and foot knights being added to the army. In 2016 I’d like to get some more cavalry done for the army, but it’s fairly low priority.
- WW2: My Fallschirmjaegers and Red Devils both received a decent amount of attention this year, with a couple of big cats for the former and a big gun for the latter. More bodies, especially officers, for both sides as well. I have plenty of models on the lead pile to carry over to 2016 and I will certainly be adding further to both projects!
- Late Romans/Arthurians: I’m deliberately keeping this army fairly small – I’ve painted up most of the infantry this year, and I just need to finish basing one last unarmoured unit to be done. Cavalry wise I have a unit of companions and of horse archers to be handled, and then a small selection of artillery. I’d like to handle all of these in 2016 and finally finish a project for once!
- Dacians and Sarmatians: These were sidelined in 2015, with just one falx unit being completed. I purchased some cavalry at Crisis last year but still haven’t gotten round to them, and I also received some Foundry foot archers from a gaming compatriot which have yet to be handled. In 2016 I’ll try and finish them, but interest is currently low.
- TYW Dutchmen: Well, shit. Nothing whatsoever was painted for this project in 2015. Better get going again or it’s Ebay time!
- 6mm WSS Catalans: No loving for them in 2015, but just before writing these words I dug them out of the lead pile to recommence work on these imps, so how’s that for progress? I have just one foot and one horse regiment done, and my projected force will count four of the former and eight of the latter, plus artillery and commanders. At the moment I have everything but the commanders in my possession, so whils I’d like to finish the project this year I’ll have to figure out how to get a hold of more Baccus stuff. I don’t think I saw them at Crisis ’15…
- ACW: Painted a couple of ACW units in 2014, but lost interest in 2015 completely – I guess all those Prussian uniforms put me off Union blue! Perhaps I’ll pick up the trail again in 2016, as I did see good progress on the Black Powder supplement for the ACW. Who knows?
- Fantasy & Sci-fi: As you might have noticed on the blog recently, Frostgrave has grabbed me firmly and won’t be letting go in 2016! I’ve dug out many old Warhammer models and made some additional non-GW purchases to complement them, and I’ll continue doing so in the foreseeable future. On the 40k side of things, 2015 saw – shock and horror – a new project in the form of the Adeptus Mechanicus, but this has fallen by the wayside a bit. I just find assembling these newer models so bloody tedious, as even the infantry models don’t go together without having to look at an assembly leaflet and match numbered parts. Still, I’d like to pick up where I left off in 2016.
- 12mm Great War models: These were a fairly cheap purchase at Warcon ’15 of which I have painted just a third of the models. They’re great sculpts, certainly, but the scale is difficult – neither my tried techniques for 28mm nor those for 6mm work well. I’ll probably get these finished in 2016, maybe buy officers for both sides, then shelve them.
- Scenery: I built a couple of items in 2015 but didn’t finish them off and, as a result, didn’t show them on the blog. I’d like to collect and build even more, but with the small apartment we’ve moved to I don’t really have the room to store an expansive collection. Choices, choices… So my pledge for 2016 will be to finish and preserve what I currently have.
- Commissions: 2015 was a busy year with a lot of Prussians (I reckon around 200 of them?) and some Arabs thrown in for good measure. As always, I’m stating now that 2016 will of necessity be a year of fewer commissions and more personal work; we’ll see how long I’ll keep that up!
So that’s the main overview of my futile attempt at coherently outlining my painting work in 2016. As ever, stuff gets dumped due to waning interest or laziness, new purchases are made because I am a wargaming magpie who likes shinies, and whole projects get shelved for a year or more because I have the attention span of a toddler in a liquor cabinet. Nothing is set in stone!
Still, despite moving house and breaking my elbow, my year of miniature painting was successful. The figure below will tell you just how successful:
That’s how many figures I painted, with each cavalry model and vehicle counting as a single model, and artillery pieces having the gun and each free-standing crewman count as a single model as well; and this across all scales. I was going for 600, so that’s not too shabby, eh? For next year I’m upping my goal to 700, but as I did last year I’m counting in the 255 surplus models from 2015. I’m devious like that.